Designed for smaller applications, yet rich in features, the Standalone Two Door Access Controller is a powerful access control solution in an economical package.

Flexibility Plus
It can control and monitor two doors with one reader, or one door with two readers. A wide range of Wiegand card formats are supported. Each reader and door can be controlled independently.

Upgradeable to a LAN based Concept 2 Door Access Module

The Standalone 2 Door Access Controller can grow with your needs. By purchasing a firmware upgrade, the Standalone 2 Door can be upgraded to become a 2 Door Access Module and interfaced with a Concept 4000 Security/Access system.

Features:

• Supports magnetic swipe or Wiegand card readers without the need for an additional interface
• Capacity for 100 cards with full user names
• Provides reed monitoring
• Request to Enter (REN) and Request to Exit (REX) inputs provided
• Inputs for fire or smoke detectors
• Multi-purpose output per door to signal Door Open Too Long (DOTL), Door Forced or Fire Alarm
• Valid/ invalid outputs
• On-board heavy duty lock relays
• Fuse protection of Reader head power
• Real time clock enabling six Time Zones, four of which are user programmable
• Timestamped 64 event hardware Review buffer
• Comes with free management software incorporating full Review log functionality

Download data sheet

Physical
Cabinet Dimensions (Standard Versions)	238(L) x 118(W) x 74(D) (mm)
Cabinet Dimensions (Powered Versions)	252(L) x 358(W) x 85(D) (mm)
Installation Environment	0°C - 40°C @15 - 85% Relative humidity (non-condensing)
Electrical
Input Voltage to PCB	11-14VDC (Typically from separate power supply)
Operational Current	70mA (No relays active and no external load)
Max	210mA
Fuse Protection	500mA
Inputs
Zone Inputs	1 per door (typically used for fire/smoke detector)
Door Inputs	Door Reed, REX, REN button per door
Reader Ports	2
Outputs
Relay	2 (Typically used for door locks)
Outputs (open collector)	6 (Typically used for Valid/Invalid and alarm indication)