The FE3000 Premier can be used to add additional reporting paths, such as GSM, GPRS* or IP* to any alarm panel that uses the Contact ID format for its reporting. All paths are monitored and if one path fails then that failure, along with any alarms, is reported via another path.

The FE3000 Premier has been purpose designed to maximise reliability of communications, regardless of the communication path it chooses.

When you use the FE3000 (Serial or Premier), your mobile phone becomes a remote keypad. Use SMS for remote diagnostics, programming and control of up to 8 outputs.

Configure the FE3000 to page up to 32 mobile phones with panel alarms converted to SMS text messages.

Your mobile phone has just become more than a means of interrogate your alarm system. The FE3000 truly adds another dimension to any alarm panel it is connected to. Designed for use on Concept 4000 panels, the FE3000 Serial provides an economical GSM / SMS interface, where the GPRS and IP capability is not required.

*GPRS/IP monitoring services and SIM cards are available from participating Multipath-IP capable Monitoring Centres. Not applicable to FE3000 Serial models.

 

Stop Press!

GPRS and IP functionality can be added to any existing FE3000 Premier by upgrading it to a Multipath-IP STU. Contact your nearest Multipath-IP capable Monitoring Centre for details.

Features:

• Comprehensive control and reporting options via SMS messaging
• Firmware upgrades can be implemented remotely or flash upgraded via on-site PC/laptop
• In built clock / calendar allows optional test reports and monthly battery testing
• Continuous PSTN voltage and current monitoring
• 32 User passwords / SMS numbers
• Earthed plug pack for increased surge protection
• Plug on 10 BaseT interface card
• GSM and PSTN paths are data capable
• High level serial interface to Concept 3000/4000 panel provides wide ranging advanced features

Physical
Housing Dimensions	375(L) x 190(W) x 72(D) (mm)
PCB Dimensions	210(L) x 145(W) x 43(D) (mm)
Installation Environment	0° - 50°C @ 15% to 85% Relative humidity (non-condensing)
Weight	4kg
Electrical
Power Supply Input	16VAC 1.5A via supplied plug pack
Operational Current	140mA (idle)
Auxiliary Output Current	400mA continuous
Recommended Battery	12VDC gel type, 7.2Ah
Typical Battery Backup Time	24 to 48 hours
Battery Fuse	2A
Min. PSTN Line Voltage	18V (on hook)
PSTN Port Surge Voltage	5kV / 10/700uS
PSTN Earthing	Yes, through supplied plug pack
Max. PABX Line Voltage	35V
Max. PABX Current	35mA
PABX Output Power	-15dBm
Max. RF Power	2W (Power class 4, 91/263/EEC directive)
Inputs
Zone Inputs	Zones 1-11 EOL, Zone 12 NO
Outputs
Auxiliary Outputs	12 open collector outputs @ 100mA (max.) each
Indicator Lamps	8